Coating · zinc flake
Geomet 321
A chromium-free, water-based zinc-aluminium flake coating without integral lubricant. Applied without electrolysis, so the process brings no hydrogen embrittlement. The friction is set with a PLUS topcoat.
Talk to Terry · Sales Engineer
What it is
How Geomet 321 protects the joint.
01Zinc flake, not platingZinc and aluminium flakes in a binder, applied as a liquid and cured. No electrolysis is involved.
02No integral lubricantUnlike Geomet 500, the basecoat has no built-in lubricant. A PLUS topcoat sets the friction coefficient for the joint.
03Chromium-freeNo hexavalent chromium.
Applications
Where we use it.
01High-strength fastenersBolts and screws where electroplating would bring a hydrogen-embrittlement risk.
02Joints with a set frictionGeomet 321 with a PLUS topcoat where the tightening torque must give a known preload.
03Thin, uniform protectionParts where hot-dip galvanizing is too thick for the thread.
Layer thickness
Protection and friction.
Layer thickness
720h
Salt spray to red rust (ISO 9227 / ASTM B117). The hours depend on the coating weight; we confirm them for your system with the quote.
| Geomet 321 | Geomet 500 | |
|---|---|---|
| Integral lubricant | No – PLUS topcoat | Yes |
| Chromium | Chromium-free | Chromium-free |
| Applied | Without electrolysis | Without electrolysis |
How it is applied
From bare steel to coated part.
01CleanBare steel, free of oil, scale and rust.
02Dip-spin or spraySmall parts in bulk by dip-spin, large parts by spray.
03CureOven cure of the binder.
04TopcoatA PLUS topcoat where the friction must be set.
FAQ
Questions we get about Geomet 321.
- What is the difference with Geomet 500?
- Geomet 500 has an integral lubricant. Geomet 321 does not; its friction is set with a PLUS topcoat.
- Is there a hydrogen-embrittlement risk?
- Zinc flake is applied without electrolysis, which avoids the hydrogen pickup of electroplating – the reason it is used on high-strength fasteners.
- Which standard applies?
- ISO 10683 for zinc flake coatings on threaded fasteners; in the US, ASTM F1136.
Next step
Quote, compare or ask.
Reviewed November 2026 by HBS Solutions. Based on NOF Metal Coatings product information, ISO 10683 and ASTM F1136. Corrosion results always belong to a complete system (pretreatment, coating, topcoat, thickness) – ask us for the data sheet of the system you order.
Other coatings
Compare with another coating.
Geomet 500Zinc flake, integral lubricantTAKECOAT-1000Fluorocarbon polymer, 2 layersXylan 1070PTFE dry film, solvent-borneXylan 1424PTFE dry film, waterborneHot-dip galvanizedISO 10684 · min 50 µm averageZinc platedElectroplated zinc · ISO 4042SherardizedZinc diffusion · ISO 17668All coatingsCompare them side by side
QUOTE WITHIN 24 HOURS
Send us your parts list.
Same-day confirmation. A complete quote within 24 hours.
REQUEST A QUOTE →
YOUR CONTACTTalk to TerrySales EngineerEmailsales@hbssolutions.nlWhatsAppChat with our engineers
Call me backLeave your number – Terry calls you