Coating · exclusive in Europe
TAKECOAT-1000
A two-layer fluorocarbon polymer system for stud bolts and nuts in severe corrosive service. Rated for at least 6.000 hours before red rust in ASTM B117 salt spray. HBS is Europe’s only authorized supplier.
Spreek Terry · Sales Engineer
Wat het is
How TAKECOAT-1000 protects the joint.
01Two layers, one systemTAKECOAT-1000 is built up in two layers of fluorocarbon polymer. Together they form a closed barrier that keeps water, salt and chemicals away from the steel.
02Long corrosion lifeRated for at least 6.000 hours in ASTM B117 salt spray before red rust – the longest of the coatings we supply.
03Wide temperature rangeContinuous use from −196 °C to +200 °C, so the same coating covers cold and warm flange service within that range.
Applications
Where we use it.
01Offshore and splash zoneFlange bolting exposed to sea water and salt spray, where replacing corroded studs is expensive.
02Long maintenance intervalsJoints that must open cleanly after years in service, for example at a planned shutdown.
03Cold and warm serviceJoints running anywhere between −196 °C and +200 °C.
Layer thickness
Thickness, fit and threads.
Layer thickness
32–45µm
Total dry film thickness of the two layers together – thicker than a single Xylan film, still far thinner than hot-dip galvanizing.
| Item | Value |
|---|---|
| Opbouw | Two layers |
| Total dry film | 32–45 µm |
| Salt spray (ASTM B117) | ≥ 6.000 h to red rust |
| Temperatuur | −196 to +200 °C |
How it is applied
From bare steel to coated part.
01ReinigenStuds and nuts are cleaned so the coating bonds to the steel.
02Two layersThe fluorocarbon polymer system is applied in two layers.
03Total filmTogether the layers reach 32–45 µm dry film.
04DeliveryCoated studs and nuts with the EN 10204 certificate of the order.
FAQ
Questions we get about TAKECOAT-1000.
- Why is it better than Xylan?
- It is a two-layer system with a thicker total film (32–45 µm) and is rated for at least 6.000 hours before red rust. Xylan results depend on grade, pretreatment and thickness.
- Which studs can be coated?
- Stud bolts, bolts and nuts. Tell us grade and size and we confirm.
- Do I need a different torque?
- Yes. Any low-friction coating changes the relation between torque and preload – use values for the coated condition, never for bare or oiled steel.
- Why only from HBS?
- HBS is Europe’s only authorized supplier of TAKECOAT-1000.
Next step
Quote, compare or ask.
Reviewed October 2026 by HBS Solutions. Based on the TAKECOAT-1000 product data. Corrosion results always belong to a complete system (pretreatment, coating, thickness) – ask us for the data sheet of the system you order.
Other coatings
Compare with another coating.
Xylan 1070PTFE dry film, solvent-borneXylan 1424PTFE dry film, waterborneXylan 1427PTFE, extra corrosion protectionGeomet 500Zinc flake, integral lubricantHot-dip galvanizedISO 10684 · min 50 µm averageZinc platedElectroplated zinc · ISO 4042SherardizedZinc diffusion · ISO 17668All coatingsCompare them side by side
OFFERTE BINNEN 24 UUR
Stuur ons uw onderdelenlijst.
Bevestiging op dezelfde dag. Een complete offerte binnen 24 uur.
OFFERTE AANVRAGEN →
UW CONTACTPERSOONSpreek TerrySales Engineer01E-mailsales@hbssolutions.nl02WhatsAppChat met onze engineers
03Bel mij terugLaat uw nummer achter – Terry belt u